MOVING GUIDESHow to load a moving truck
A well-loaded truck is mostly a matter of order. Heavy things go in first and low, long things stand against the walls, boxes build a square wall, and the fragile pieces are wedged in last with nothing on top.
The order, front to back
Work from the wall behind the cab towards the door, in five passes. Each pass fills a section of the deck several pieces deep before the next begins.
1.
Low and near the cab, centred over the axle. Nothing heavy rides high.
2.
Against a side wall, strapped to the tie rails – long pieces on edge or on end.
3.
Stacked square from the deck up, heaviest at the bottom, gaps filled.
4.
Upright and wedged between soft things. Nothing goes on top of these.
5.
By the door, so it comes off first at the other end.
Heaviest low, near the cab
Appliances, dressers, bookcases and anything solid go in first. Keeping the weight forward and low keeps the truck steady on the road. For a refrigerator: upright against the wall behind the cab, strapped. Never on its back or side.
Chests of drawers ride upright, drawers facing a wall so they cannot slide open. Leave clothes in the drawers to save boxes, but take out anything heavy or breakable.
Long pieces along a wall
Sofas, mattresses, table tops and bed rails stand on end or on edge against the side walls. Standing up, they take a fraction of the floor they would lying down. A mattress goes on its long edge, flat against a side wall, running the length of the truck.
Boxes stacked square, fragile wedged
Build the boxes into a wall from the deck up: the heaviest at the bottom, the lightest on top, every gap filled so the stack cannot lean. Same-size boxes make this far easier.
Mirrors, lamps and the TV go in late, upright and wedged between soft things – mattresses, cushions, bagged bedding. Never lay glass flat. Never lay glass flat — anything set on top of it will break it.
Strap it to the tie rails
Most rental trucks have tie rails along the inside walls. Run a strap across the load every few feet as each section goes in, not at the end, so nothing walks on the first turn. Ask for straps and furniture pads when you collect the truck if you do not have your own.
The night before
Most damage on moving day starts with a piece that was not ready. The evening before:
☐
Empty and defrost a day ahead, then tape the doors shut and coil the cable inside.
☐
For a washing machine: fit the transit bolts, drain the hoses, and tape the door and cable.
☐
For a table: take the legs off, bag the hardware, and tape the bag underneath the top.
☐
For a bed: break it down, bundle the rails together, and tape the bagged bolts to one of them.
☐
For a mower or generator: run the fuel tank dry, or drain it, and disconnect the spark plug lead.
☐
For a gas grill: take the propane cylinder off and transport it yourself, outside the truck.
☐
Set aside a box of what you need first at the other end – tools, chargers, bedding, the coffee – to go on last, by the door.
How Loadsy helps
From photos of your rooms, Loadsy writes a load plan for your own furniture: every piece numbered in the order it goes in, where it rides, and what to do to it first. Moving Day turns that plan into a checklist you tick off as each piece goes on.
Get Loadsy on the App Store All moving guides →Estimates only. Loadsy is not a moving company. iPhone only, for now.